Totalizing-Flow-Meters- Sure Flow Products-Series SP/T and SP/X

Totalizing Flow Meters

SERIES CM : Corioils Mass Flow Meter

No Moving Parts – No Obstruction of Flow Path
Full scale flows from 1.3 GPM to 260 GPM
Connection Sizes: ½ inch to 3 inches (Flanged, Sanitary/Tri-Clamp, or Threaded)
Construction Materials: Stainless Steel
4-20mA Ouptut for Flow, & Temperature
Optional Integral or Remote Digital Display of Rate, Total, or both
Battery powered
Accuracy: 0.5% of Rate
Turn Down/Rangeablility: 30:1
Maximum Pressure: 5000 PSIG
Applications include Food, Milk, Paints, Slurries, Water, Oils, Chemicals, Fluids Containing Debris, Waste Fluids, Air & Gases

Full scale flow ranges from 0.5 SCCM to 3000 SCFH
Connection sizes from 1/8-inch to 3/4-inch NPT
Construction materials: Stainless Steel
Battery powered LCD that displays rate, temperature, and pressure with an option for total
Transmitter outputs include open collector contacts, RS communications, 5 VDC, or optional 4-20mA for flow/temperature, or flow/pressure
A quick response time of 5 milliseconds or less
Accuracy is 1% of full scale flow rate
No moving parts
Up to 14 field selectable gases or gas mixtures
Optional portable, battery powered flow meter
Optional flow controller
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

Full scale flow ranges from 18 to 116,000 GPM
Connection sizes from 1/2-inch to 20-inch wafer, sanitary, or flange
Construction materials: 304 Stainless Steel with Teflon or Rubber Lined
Electrode materials: 316L, Hastelloy C, Monel, Titanium, or Tantalum
No moving parts or flow obstructions
Programmable response time from 0.1 seconds to 100 seconds
Accuracy is 0.5% of rate
Nema 4x display enclosure
Pressure ratings to 600 PSIG
Optional integral or remote micro-processor based LCD that displays rate, total, contacts, and retransmission signals
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

Full scale flow ranges from 2.6 to 90 GPM
Connection sizes from 1/2-inch to 2-inch NPT, BSP, sanitary or flange
Construction materials: 316L Stainless Steel or Aluminum body with PEEK internals
Accuracy is 0.5% of rate
Pulse, 0-5 VDC, or 4-20 mA transmitter outputs
Nema 4x display enclosure
Pressure ratings to 1200 PSIG
Optional battery powered LCD that displays rate, total, contacts, relays, batch control, and retransmission signals
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

For use in application of:
water, sea water, DI water, chemicals corrosives and other light viscosity fluids.

Cost Effective Paddle Wheel Flow Meter
Low Pressure Drop
No Power Required
Battery Powered with 5 to 7 year operating duration
Rotates for vertical or horizontal mounting
Continuous Display of Flow Rate, Resettle Total and
Non Resettable Total or; Remote Display or;
Pulse Output Only (no display)
Operates in any flow direction
Easy to remove sensor for cleaning
Available in 2 Styles Saddle mount or Inline
Connection Sizes form 1/2 inch up to 8 inches
Connection Type: NPT, Flanged, Union and Plain Ended
Full Scale Flow Ranges from: 15 to 3200 GPM
Optional Pulse Output
Simple and User Friendly

For use in application of:
air, gases, and liquids

Full scale flow ranges from 0.15 GPH to 400 GPM and .015 SCFH to 2000 SCFM
Connection sizes from 1/4-inch to 48-inch flange, tube fitting, sanitary, stub-welded, or hot tap
Construction materials: 316L Stainless Steel (standard), other materials available
Transmitter outputs include open collector contacts, 5 VDC, or 4-20mA for flow/temperature, or flow/pressure
Accuracy is 0.5% of rate
No moving parts or flow obstructions
Pressure ratings to 10,000 PSIG
Optional battery powered LCD that displays rate and total
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION