Indicators-Selection by required styles

Indicators

SERIES KM* : Flow Rate Indicator

Full scale flow ranges from 6 GPH to 220 GPM
Connection size 1/4-inch to 3-inch NPT or BSP
Construction materials: PVC, Polysolphone, or PVDF
Reads in GPM & LPM scale
Clear flow tube allows for view of process and scale
Pressure ratings to 145 PSIG
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES TM/I, TM/P, TM/C* : Thermal Mass Flow Meters Aggressive and Non-Aggressive Applications

For use in application of:
air, gases, and liquids

Full scale flow ranges from 0.15 GPH to 400 GPM and .015 SCFH to 2000 SCFM
Connection sizes from 1/4-inch to 48-inch flange, tube fitting, sanitary, stub-welded, or hot tap
Construction materials: 316L Stainless Steel (standard), other materials available
Transmitter outputs include open collector contacts, 5 VDC, or 4-20mA for flow/temperature, or flow/pressure
Accuracy is 0.5% of rate
No moving parts or flow obstructions
Pressure ratings to 10,000 PSIG
Optional battery powered LCD that displays rate and total
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES CM : Corioils Mass Flow Meter

No Moving Parts – No Obstruction of Flow Path
Full scale flows from 1.3 GPM to 260 GPM
Connection Sizes: ½ inch to 3 inches (Flanged, Sanitary/Tri-Clamp, or Threaded)
Construction Materials: Stainless Steel
4-20mA Ouptut for Flow, & Temperature
Optional Integral or Remote Digital Display of Rate, Total, or both
Battery powered
Accuracy: 0.5% of Rate
Turn Down/Rangeablility: 30:1
Maximum Pressure: 5000 PSIG
Applications include Food, Milk, Paints, Slurries, Water, Oils, Chemicals, Fluids Containing Debris, Waste Fluids, Air & Gases

SERIES DF : Portable, Non-Intrusive Flow meter

Non-Intrusive
No Moving Parts
No Routine Maintenance Required
No Contact with Liquid
Not Affected by Line Pressure
Large 3.5” LCD Readout
Low Battery Indicator
Adequate Doppler Signal Indicator
Lightweight
Portable (compact and light weight)
Can Calibrate for Acoustic Velocity

SERIES DKM, DKM/A, DKG : Viscosity Compensating Indicators and Switches

Full scale flow ranges from 60cc/m to 40 GPM and 4 SCFM to 400 SCFM
Connection sizes from 1/4-inch to 1-inch NPT or BSP
Construction materials: Brass or Stainless Steel
Spring loaded, mechanical design mounts in any orientation
Calibrated scale for easy field adjustability
Pressure ratings to 4500 PSIG
Maintains accuracy regardless of viscosity fluctuations
Optional field adjustable switches

SERIES FIS : Low Cost Rate Indicators with Switch

Full scale flow ranges from 4 to 100 GPM (16 to 380 LPM) and 10 SCFM to 250 SCFM
Connection sizes from 1/2-inch to 2-inch NPT, BSP, or SAE
Construction materials: Polysulphone flow tube with Brass, Stainless Steel, or PVC end fittings
Spring loaded, mechanical design mounts in any orientation
Reads in GPM and LPM scale
Pressure ratings to 325 PSIG (liquids) and 125 PSIG (air)
Clear flow tube allows for view of process and scale

SERIES FSR : Low Cost Sight and Rate Indicators

Full scale flow ranges from 5 to 100 GPM (20 to 380 LPM) and 10 SCFM to 250 SCFM
Connection sizes from 1/4-inch to 2-inch NPT, BSP, or SAE
Construction materials: Polysulphone flow tube with Brass end fittings
Spring loaded, mechanical design mounts in any orientation
Reads in GPM and LPM or SCFM
Pressure ratings to 200 PSIG
Clear flow tube allows for view of process and scale

SERIES GM, GV* : Mass and Volumetric Flow Meters for Air and Gases

Full scale flow ranges from 0.5 SCCM to 3000 SCFH
Connection sizes from 1/8-inch to 3/4-inch NPT
Construction materials: Stainless Steel
Battery powered LCD that displays rate, temperature, and pressure with an option for total
Transmitter outputs include open collector contacts, RS communications, 5 VDC, or optional 4-20mA for flow/temperature, or flow/pressure
A quick response time of 5 milliseconds or less
Accuracy is 1% of full scale flow rate
No moving parts
Up to 14 field selectable gases or gas mixtures
Optional portable, battery powered flow meter
Optional flow controller
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES GT : Turbine Meter with Display

Full scale flows from 10 GPM to 200 GPM
Connection Sizes: ½ inch to 2 inches
Construction Materials: Aluminum, Brass, Stainless Steel, Nylon, PVC
Digital Display of Rate, Total, or both
Battery powered
Option Outputs: Pulse or 4-20mA

SERIES HFR* : High Pressure/Temperature Indicators, Switches, and Transmitters

Full scale flow ranges from 1 to 150 GPM and 10 SCFM to 1,300 SCFM
Connection sizes from 1/4-inch to 8-inch NPT, BSP, SAE or flange
Construction materials: Brass, Stainless Steel, or Aluminum
Spring loaded, mechanical design mounts in any orientation
Viscosity compensating for liquids to 500 SSU
Pressure ratings to 6000 PSIG
Optional high temperature design up to 600 degrees F (315 C)
Optional field adjustable switches
Optional 4-20mA transmitter
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES IP : Ultra High Capacity Insertion Paddle Wheel for Light Viscosity Fluids

Full scale flow ranges from 5 to 99,000 GPM
Insertion connection sizes from 1-inch to 2-inch NPT or BSP
Construction materials: 316 Stainless Steel Body and PEEK paddle wheel
Pulse, 0-5 VDC, or 4-20 mA transmitter outputs
Nema 4x display enclosure
Pressure ratings to 1200 PSIG
Optional battery powered LCD that displays rate and total

SERIES MG* : High Capacity Magnetic Flow Meter

Full scale flow ranges from 18 to 116,000 GPM
Connection sizes from 1/2-inch to 20-inch wafer, sanitary, or flange
Construction materials: 304 Stainless Steel with Teflon or Rubber Lined
Electrode materials: 316L, Hastelloy C, Monel, Titanium, or Tantalum
No moving parts or flow obstructions
Programmable response time from 0.1 seconds to 100 seconds
Accuracy is 0.5% of rate
Nema 4x display enclosure
Pressure ratings to 600 PSIG
Optional integral or remote micro-processor based LCD that displays rate, total, contacts, and retransmission signals
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES MW :Variable Area Flow Rate Indicators

Direct Reading Flow Rate Indication
Optional switch(es)
Optional 4-20mA output signal
Pressures up to 2000 PSIG (410 Bar)
Maximum temperatures to 400oF (315oC)
Wafer connection mounts easily between
ANSI, JIS or DIN flanges
Versatile mounts in any orientation
No Straight Pipe Runs Required
Easy to read with Dark or Opaque Fluids
Full Scale Flow Ranges from
15 GPM (50 LPM) to 5000 GPM (19,000 LPM)
100 SCFM to 50,000 SCFM (depending upon pressure)
Connections sizes are from 3-inch to 12-inches

SERIES PD* : Positive Displacement Flow Meter with Superior Accuracy

Full scale flow ranges from 2.6 to 90 GPM
Connection sizes from 1/2-inch to 2-inch NPT, BSP, sanitary or flange
Construction materials: 316L Stainless Steel or Aluminum body with PEEK internals
Accuracy is 0.5% of rate
Pulse, 0-5 VDC, or 4-20 mA transmitter outputs
Nema 4x display enclosure
Pressure ratings to 1200 PSIG
Optional battery powered LCD that displays rate, total, contacts, relays, batch control, and retransmission signals
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES RVO/U* : Compact Indicators and Switches for Low Flow Rates

Full scale flow ranges from 60cc/m to 40 GPM and 4 SCFH to 400 SCFM
Connections sizes from 1/4-inch to 1-inch NPT or BSP
Construction materials: Brass or Stainless Steel
Calibrated scale for easy field adjustability
Spring loaded, mechanical design mounts in any orientation
Clear flow tube allows for view of process and scale
Pressure ratings to 145 PSIG
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES SFB-Ball and SFP-Paddle Styles : Low Cost Entry Level Flow Indication

For use in applications of: Water, oil, synthetic oil, hydraulic oil, coolants, paint, solvents, corrosives, air, and gases.

Clear Flow Indication – Full View of Process
Operates Over a Wide Flow Range
No Routine Maintenance Required
230 PSI/400 Degrees F Capability
Applications of Liquids , Air, & Gases
Low Pressure Loss
Materials: Bronze, Stainless Steel, Teflon, PPS

SERIES U3, F3, M3* : High Capacity Indicators, Switches, Transmitters

Full scale flow ranges from 1 to 250 GPM
Connection sizes from 1/4-inch to 3-inch NPT, BSP, or flange
Construction materials: PVC or Teflon body with 316L S.S. or Tantalum internals
Spring loaded, mechanical design mounts in any orientation
Easy to read, large scale design that rotates
Low pressure drop
Optional field adjustable switches for hazardous and non-hazardous locations
Optional 4-20mA transmitter
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

SERIES Y, U, F, M* : High Capacity Indicators, Switches, Transmitters

For use in application of:
water, oil, synthetic oil, hydraulic oil, coolants, paint, solvents, corrosives, air, and gases.

Full scale flow ranges from 1 to 1200 GPM and 10 SCFH to 10,000 SCFM
Connection sizes from 1/4-inch to 8-inch NPT, BSP, flange, sanitary or victaulic
Construction materials: Brass, 316L S.S., Cast Iron, Aluminum, or Carbon Steel
Spring loaded, mechanical design mounts in any orientation
Easy to read, large scale design that rotates
Low pressure drop
Pressure ratings to 2000 PSIG
Optional field adjustable switches for hazardous and non-hazardous locations
Optional 4-20mA transmitter
* FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION