Swing Vane Variable Area Flow Rate Indicators Transmitters Oil Water Liquid Gas

 

Indicators > SERIES Y, U, F, M* : High Capacity Indicators, Switches, Transmitters

SERIES Y, U, F, M* : High Capacity Indicators, Switches, Transmitters

Download

SERIES Y, U, F, M* : High Capacity Indicators, Switches, Transmitters

  • Full scale flow ranges from 1 to 1200 GPM and 10 SCFH to 10,000 SCFM
  • Connection sizes from 1/4-inch to 8-inch NPT, BSP, flange, sanitary or victaulic
  • Construction materials: Brass, 316L S.S., Cast Iron, Aluminum, or Carbon Steel
  • Spring loaded, mechanical design mounts in any orientation
  • Easy to read, large scale design that rotates
  • Low pressure drop
  • Pressure ratings to 2000 PSIG
  • Optional field adjustable switches for hazardous and non-hazardous locations
  • Optional 4-20mA transmitter
    * FACTORY PRE-CALIBRATED TO CUSTOMERS SPECIFICATION

 

INTRODUCTION

Flow - Mon USA fl ow products combine fl exibility, reliability, and quality for cost effective sure fl ow solutions in liquids, air, and gases. These fl ow instruments are fi eld proven to be dependable, durable, and long lasting, even in the most diffi cult industrial applications. Flow - Mon USA monitors provides direct reading indication of fl ow rate with optional electrical switches and transmitter outputs. Available in a variety of metal materials, these monitors are also offered in PVC and Tefl on construction for corrosive fl uids, or for use in corrosive environments.

FEATURES/BENEFITS:
* ALL METAL CONSTRUCTION/ NO TUBES OF GLASS
   OR PLASTIC TO BREAK
* SPRING LOADED MECHANICAL DESIGN/ REQUIRES
  NO STRAIGHT PIPE RUN, NOT AFFECTED BY ORIENTATION
* LIMITED MOVEMENT ON INTERNAL PARTS/ MINIMAL
   WEAR AND DOWN TIME
* MODULAR DESIGN/ REDUCES MAINTENANCE COSTS,
  DOWN TIME , AND PRODUCTION LOSS
* DIRECT INDICATION & FIELD ADJUSTABLE SWITCH(ES)
   / MONITORS CRITICAL FLOWS AND PROVIDE ALARM
* 1% OF RATE REPEATABLE SWITCH SET POINT / ACCURATE & RELIABLE
  THROUGH ALL OPERATION CYCLES
* FLOW THROUGH DESIGN/MINIMAL PRESSURE LOSS
* INDIVIDUALLY CALIBRATED TO CUSTOMER
  SPECIFICATIONS/ENSURES ACCURACY
APPLICATIONS:
WATER
DEIONIZED WATER
PETROLEUM BASED FLUIDS SYNTHETIC BASED FLUIDS
COOLANTS
GLYCOLS
PAINTS SOLVENTS
CORROSIVE FLUIDS
AIR & GASES
 

Flow - Mon USA monitors operate from two basic variable area spring loaded designs, the piston and vane styles. Both have a unique modular design for easy fi eld installation and service. They do not require any straight pipe runs before or after the monitor thus minimizing the installation footprint. The versatile designs of the piston and vane style monitors allow for the piping orientation to be mounted in any position. Comparable to similar style devices in the industry, Flow - Mon USA monitors “fl ow through” design offers a low-pressure loss. To ensure accuracy they are individually calibrated in any unit of measure to customer operating specifi cations.

Piston style monitors operate when fl ow enters the inlet connection and forces the piston to create a variable orifi ce when moving across a tapered shaft. This movement drives the indicator shaft and pointer. On a loss of fl ow, the spring forces the piston back across the tapered shaft reducing the fl ow orifi ce created by the shaft and piston. Piston style monitors are used for monitoring maximum full-scale fl ows from 50 cc/min (.75 GPH) to 1.5 GPM. (See Series Y)

Vane style monitor operates when fl ow is introduced through the inlet connection making direct contact with the vane that is mechanically linked to the indicator shaft. The fl uid forces the vane to move through a contoured opening creating a variable orifi ce. The greater the fl ow the larger the orifi ce becomes for fl ow to pass. The vane style monitor is also spring loaded and allows the vane to return on decreasing fl ows. Maximum full-scale fl ows are available from 1 GPM to1200 GPM. (See Series U, F, and M)

For critical applications that require fl ow to be monitored, repeatable (1% of rate) fi eld adjustable electrical switches are utilized. These switches are UL, CSA, and CE listed for hazardous and non-hazardous fl uids, gases, or environments. For data collecting, trending, and recording applications output transmitters are also offer


Copyright 2006 SURE FLOW Products, LLC Tel: 248-380-3569 Fax: 248-380-3568 Email: sales@sureflowproducts.com